RFPIndia Inc. is one of eminent manufacturers and suppliers of high quality aluminium Alloy series such as series 1, 3, 5, 6 and 8. We offers a commendable range of Aluminium Alloys, for clients at a competitive price.Aluminium alloys have special quality finishing and duress for long life, high pressure and zero defects. Aluminium Piping is also a Aluminium alloys Stockholders and suppliers. We are stocking various international & approved brands to cater to the needs of our clients.
1050 1050A 1060 1100 3003 3004 3005 3102 3105 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 6061 6063 6082 8011 8011A
More in Alloy series in Bosconia, Cesar
1 Series Alloy
Series 1 alloy, generally called commercial pure aluminium, the Al content of this series is above 99.0%. Feature: high conductivity, good corrosion resistant performance, high latent heat of melting, high-reflectance, well welding property, low strength, and not suitable for heat treatments.1 series alloy is mainly used in general industrial device, daily life tools, storage, scientific experiments, chemical industry, and so on.
- Alloy 1050 1050A 1060 1100
- Temper O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc.
- Specification Thickness≤30mm (For tread plate, Thickness≤6mm) Width≤2250mm Length≤12000mm OR Coil (C)
- Application Antiskid Tread Plate, Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc.
3 Series Alloy
3 series alloy, generally called Al-Mn Alloy, the manganese is used as main alloy element. Feature: good rust resistance, not suitable for heat treatments, good corrosion resistant performance, well welding property, good plasticity, low strength but suitable for cold working hardening. 3 series alloy is mainly used in decoration, heat-sink device, external walls, storage, sheets for construction, etc.
- Alloy 3003 3004 3005 3102 3105
- Temper O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc.
- Specification Thickness≤30mm (For tread plate, Thickness≤6mm) Width≤2250mm Length≤12000mm OR Coil (C)
- Application Antiskid Tread Plate, Lid Stock, Can Body Stock, Curtain Wall Plate
5 Series Alloy
5 series alloy, generally called Al-Mg Alloy, the magnesium is used as main alloy element. Feature: all the advantages of normal aluminium alloy, high tensile strength & yield strength, good corrosion resistant performance, well welding property, well fatigue strength, and suitable for anodic oxidation. The brightness of 5 series alloy is not as good as 1 series& 3series alloy, but it is widely used in industrial field.
- Alloy 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06
- Temper O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc.
- Specification Thickness≤170mm (For tread plate, Thickness≤6mm) Width≤2250mm
- Application Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile Body Sheets, Automobile Inside Board, The Protective Cover On Engine
6 Series Alloy
6 series alloy, generally called Al-Mg-Si Alloy, the magnesium and silicon are used as main alloy element. Feature: most the advantages of 4 series & 5 series alloy, good corrosion resistant performance, well welding property, good oxidability, easy to spray-finishing, well oxidation coloring, good machinability, middle strength, often used after heat treatments.
- Alloy 6061 6063 6082
- Temper O F, etc.
- Specification Thickness≤170mm Width≤2250mm Length≤12000mm OR Coil (C)
- Application Aluminium For Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components, Transport Ship, Semiconductor Equipments, etc.
8 Series Alloy
8 series alloy, generally called Other Aluminium Alloy. It is mainly used in heat-sink device, lid stock, aluminium foil, and so on.
- Alloy 8011 8011A
- Temper O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38, etc.
- Specification Thickness≤30mm Width≤2250mm Length≤12000mm OR Coil (C)
- Application Lid Stock, Air-Condition Foil, Al-Alloy Door & Window, Household Aluminum Foil, Medicinal Aluminum Foil, etc.